Custom Plastic Centrifuge Tubes Factory Manufacturer

Key points for using centrifuge tube

When working with centrifuge tubes, it is important to remember a few key points:

1. Material: Choose the material that is right for your application. Common choices are plastic (polypropylene) and glass. Plastic tubing is generally safer for high-speed centrifuges due to its anti-breakage properties.

2. Capacity: Select a tube with the appropriate volumetric capacity for your sample. Overfilling will affect the balance of the centrifuge and may cause inaccurate results or damage.

3. Sealing: Ensure the tube is sealed correctly to prevent leakage during centrifugation. Screw caps or snap caps are often used for this purpose.

4. Balance: Always load the centrifuge rotor with the same mass of sample or counterweight to maintain balance. An unbalanced load can cause vibration and damage the centrifuge.

5. Reinforced: High-speed centrifugation can generate considerable force. Make sure the tube is designed to withstand the expected speed and force to avoid rupture.

6. Speed and Time: Follow the manufacturer's recommended maximum speed (RPM) and centrifugation time to prevent tube failure or sample contamination.

7. Temperature: Some samples are sensitive to temperature changes during centrifugation. Pay attention to this point and choose the appropriate centrifugation conditions.

8. Labels: Clearly label your tubes with pertinent information such as sample type, date, and any special conditions. This prevents confusion and ensures correct identification.

9. Safety: Always wear proper personal protective equipment when centrifuging. This may include lab coats, gloves, and goggles.

10. Cleaning: Clean the test tube thoroughly after each use to prevent cross-contamination between samples. Use a suitable cleaning agent and method for the tubing.

11. Guaranteed Quality: Use high-quality centrifuge tubes from a reputable manufacturer to ensure consistent and reliable results.

12. Maintenance: Regularly inspect centrifuge tubes for signs of wear, cracks, or defects. Replace damaged pipes in time to prevent accidents.